Product Summary

• Material standard

  SGP-VB Hard PVC lined steel pipe for water supply (JWWA K116) SGPW water pipe galvanized steel pipe (JIS G3442) coated with hard vinyl chloride resin (JIS K6742) on the inner surface. Excellent corrosion resistance, oil resistance, and chemical resistance on the inner surface of the pipe. Since the inner surface is a smooth hard vinyl chloride resin, the frictional resistance is small and changes in flow rate and flow velocity inside the pipe can be minimized.

• Application

  Mainly for indoor and outdoor water supply piping

• Screw standard

  An external thread type pipe joint that requires a taper male thread [symbol: R (PT)]. (Compliant with JIS B0203) Suitable for joining screws with the main purpose of tightness resistance when joining internally threaded pipe fittings, other pipe parts, fluid equipment, etc.

• Maximum working pressure

  1MPa

• Mechanical strength

  Same as SGP steel pipe.

• Recommended temperature

  0 to 40 ° C when using pipe end anti-corrosion fittings

• About inspection of screw

  All thread inspections are performed using a taper thread gauge specified in the standard number (JIS B0253) defined by the Japanese Industrial Standards (JIS standard). In addition, our inspection gauge manufacturer uses OSG (OSG).

• Join method

  When tightening, after tightening by hand, it is necessary to tighten with torque using a tool such as a pipe wrench. However, in order to have a tight connection, even if it is tightened tightly, there is a slight space between the top and bottom of the mountain in practical use, and perfect airtightness cannot be secured. Therefore, it is necessary to take measures such as wrapping seal tape (tape-like gap filling material) around the screw before assembly or applying the same liquid sealant. (It is necessary to select the type of sealing material suitable for the piping application.) Also, when assembling in a place where attention is paid to leakage, seal tape (about 2 to 3 turns) is wound around the external thread. Apply sealant from the top, and then apply sealant on the female screw side and tighten it to ensure tightness.

• Inspection pressure

  Leakage(pneumatic)	0.5Mpa(5.1kgf/cm2)
  Pressure resistance(water pressure)	2.5Mpa(25.5kgf/cm2)

• Type, symbol, chemical composition

  Type	Symbol	Chemical composition(%)
  		P	S
  Galvanized steel pipe for water piping	SGPW	0.040 or less	0.040 or less